Prev
Next
Forums S3 Application Upgrades

Print Job Parameters

Sort:
You are not authorized to post a reply.
Author
Messages
BrendaH
Basic Member
Posts: 5
Basic Member
6/18/2009 4:11 PM
    Looking for a way to run and save print job parameters report for all users rather than making screen shots for an upgrade to 9.0.

    Thanks.
    Derek Czarny
    Veteran Member
    Posts: 63
    Veteran Member
    6/18/2009 4:27 PM
      You could dump out the JOBSTEP table from GEN.
      John Henley
      Senior Member
      Posts: 3348
      Senior Member
      6/18/2009 5:46 PM
        Have you looked at the upgrade documentation?
        There is a jobprmrpt to do exactly that.
        Also ujobdump & ujobload to port over the jobs.

        Moving this to the upgrades forum...
        Thanks for using the LawsonGuru.com forums!
        John
        Mark F. Hardy
        Veteran Member
        Posts: 44
        Veteran Member
        2/1/2011 7:58 PM
          I tried to utilize ujobdump and ujobload to port jobs from one system to another.
          I did this at a user level, sampling three users; I was only successful with one user.
          We did this adhoc around the time we upgraded to 9.01 LSF.
          I had to assume it would work in its entirety, but during PROD install, it was not successful.
          The users had to fall back to their manual print images.
          A followup inquiry with Lawson also did not resolve it, and I let it lay until the next upgrae.
          You are not authorized to post a reply.