OLAPPROF FILE
Data Mart Profiles
The Information Transfer Profiles (OLAPPROF) file stores the information for
each information transfer profile that is defined by the IA11.1 (Information
Transfer Profiles) program.
REFERENCED BY
IA120 IA150 IA16.1 IAPF.1
UPDATED BY
IA10.1 IA10.2 IA11.1 IA11.3 IASV.1 IASV.2
FIELD NAME DESCRIPTION/VALID VALUES UPDATED BY
OLP-DATA-MART-NAME Alpha 20 (Lower Case) IA11.1 IA11.3
Data Mart Name IASV.1
OLP-PROFILE-NAME Alpha 12 (Lower Case) IA11.1 IA11.3
Profile Name The Profile name field contains the IASV.1
name of the profile that is defined in
the IA11.1 (Information Transfer
Profiles) form. Each profile name
represents a run option that is used
when the data mart is updated. Run
options include the name of the calc
script, the outline load and data values
load options no load, incremental or
complete), and the names of the outline
dimensions to include in the build. This
user-defined field can contain up to 12
characters.
OLP-DESCRIPTION Alpha 30 (Lower Case) IA11.3
Description The Description field contains a
description of the profile.
OLP-CALC-OPTION Alpha 1 IA11.1 IASV.1
Calc Option The Calc Option field determines
whether the data mart should be
completely calculated (Essbase Calc All)
after the outline is built and the data
values have been loaded.
Valid values are:
Y = Yes; Default value.
N = No
OLP-CALC-SCRIPT Alpha 8 (Lower Case) IA11.1
Calc Script The Calc Script field determines how
the OLAP data mart is calculated. If a
calc script has been defined, type the
name of the script in this field. If Y
(Yes) is specified in the the Calc All
field, the calc script is performed
after the data mart has been calculated
completely. If N (No) is specifed in the
Calc All field, and no calc script is
specifed, the data mart is not
calculated. To perform the default calc
script that is used by the OLAP data
mart, leave this field blank.
This user-defined field can contain up
to eight alphanumeric characters.
OLP-META-DATA-OPT Alpha 1 IA11.1 IA11.3
Outline Load Option The Outline Build field specifies how IASV.1
the outline is built.
Value values are:
N = No Build
I = Incremental Build
C = Complete Build; Default value.
U = UDAs and Alias Names Only
Y = Update
OLP-DATA-LOAD-OPT Alpha 1 IA11.1 IA11.3
Data Values Load The Data Values Load Option field IASV.1
Option specifies how the data values are loaded
into the data mart.
Value values are:
N = No Load
I = Incremental
C = Complete; Default value.
OLP-STAGE-OPTION Alpha 1 IA11.1 IASV.1
Data Stage Option The Data Values Staging Option field
determines whether the data mart remains
active for users while new data is being
loaded. If the stage option is set to Y
(Yes), data is loaded in a temporary
data mart and copied back to the
original data mart upon completion. To
stage the data load process, there must
be enough disk space to support both the
original data mart, as well as the
temporary data mart, even though the
temporary data mart is deleted after it
has been copied back to the original
data mart.
Valid values are:
Y = Yes
N = No; Default value.
OLP-ACTIVE-STATUS Alpha 1 IASV.1
Active Status The Active Status field contains the
status of the profile.
Valid values are:
A = Active
I = Inactive
OLP-META-OVERRIDE Alpha 1 IASV.1
Outline Override The Outline Override field specifies
whether the data mart outline can be
overwritten when the data mart is built.
If overrides are allowed, the names of
the outline dimensions that are
specified on the IA11.1 (Data Mart
Profiles) form are the only dimensions
that are updated when the data mart is
built.
Valid values are:
Y = Yes
N = No; Default value.
OLP-DATA-OVERRIDE Alpha 1 IASV.1
Data Values Override The Data Override field specifies
whether the data values can be
overwritten when the data mart is
loaded.
Valid values are:
Y = Yes
N = No; Default value.
OLP-CLEAR-DATABASE Alpha 1 IA11.1 IASV.1
Data Values Clear The Data Values Clear Option field
determines whether the data mart should
be cleared prior to updating it. This
value does not apply if
- the data load option is set to I
(incremental load),
- the data load option is set to N (no
load),
- the data values staging option is set
to Y (Yes), and
- external data sources have been
specified.
Y = Yes
N = No
OLAPPROF FILE INDEX
NAME KEY FIELDS DESCRIPTION / SUBSET CONDITION USED IN
OLPSET1 DATA-MART-NAMEKeyChange IA10.1 IA10.2
PROFILE-NAME IA11.1 IA11.3
IA120 IA150
IA16.1 IAPF.1
IASV.1 IASV.2
OLAPPROF FILE RELATIONS
ONE TO ONE RELATIONS
RELATION RELATED
NAME FILE INTEGRITY RULES / FIELD MATCH
Olapdbm OLAPDBM Required
OLP-DATA-MART-NAME -> ODB-DATA-MART-NAME
OLAPPROF FILE RELATIONS
ONE TO MANY RELATIONS
RELATION RELATED
NAME FILE INTEGRITY RULES / FIELD MATCH
Profdatrel PROFDATREL
OLP-DATA-MART-NAME -> PFL-DATA-MART-NAME
OLP-PROFILE-NAME -> PFL-PROFILE-NAME
PFL-DATA-LOAD-NAME
|
