Prev
Next
Forums Infor / Lawson Platforms Lawson Landmark

Landmark install issues in ssoconfig

 4 Replies
 0 Subscribed to this topic
 32 Subscribed to this forum
Sort:
Author
Messages
Larry Lamb
New Member Send Private Message
Posts: 1
New Member
7/16/2013 1:00 PM
Hi, We are installing Landmark 10.0.4.0 (on a Unix server with AIX) and are having an issue with the ssoconfig command when trying to load the SSOPV2.xml file -

ERROR:  Bad Attribute value "Use HTTPS only" is provided for attribute PROTOASSERT Any ideas? We have checked the SSOPV2.xml file - (xxxxx's put in to redact our web url)

SSOPV2.xml file:

   

        SSOPV2

        user

        password

        user,password

        password

        TRUE

       

        Use HTTPS always

            http://xxxxxxx.xxxxxx:84/sso/SSOServlet

            https://xxxxxxxx.xxxxxxx:446/sso/SSOServlet

            Verify passwords in Lawson Security

            _ssoUser

            _ssoPass

            https://xxxxxxxxxxxxxx:443/lawson/portal

            POST

       

        Form based

   

this is the pertinent section of our LANDMARK install.cfg file (99.99.99.99 redacted for our web IP)  

LMRK_HOME_PAGE_URL=https://10.99.99.99:446/lawson/

LMRK_HTTPS_PORT=446

LMRK_HTTP_PORT=-1

LMRK_LOGIN_PAGE_URL=https://10.99.99.99:446/sso/login.html

LMRK_PROTOCOL=https://

LMRK_SERVICE_PROTOCOL=HTTPS_ONLY

LMRK_WEB_HOST=99.99.99.99

LMRK_WEB_PORT=446 Any ideas?

Kwane McNeal
Veteran Member Send Private Message
Posts: 479
Veteran Member
7/16/2013 1:21 PM
Larry, sounds like a bug in the installer. I checked my install.cfg, and I have the same value. Report it to Lawson. also I make habit to avoid CU0, for this very reason. Kwane
John Henley
Send Private Message
Posts: 3351
7/16/2013 2:10 PM
I ran into this as well. I think it was 10.0.3 CU14 though. Let me see if I can find what I did
Thanks for using the LawsonGuru.com forums!
John
John Henley
Send Private Message
Posts: 3351
7/16/2013 3:34 PM
Is this the ssoconfig in LSF or Landmark? Also, 10.0.4.0 CU1 is now out
Thanks for using the LawsonGuru.com forums!
John
elessarfl
Basic Member Send Private Message
Posts: 4
Basic Member
7/17/2013 3:05 PM
Thanks everyone! Hi John, per the install guide, did a . cv to the LSF environment then did the ssoconfig command