Can anyone tell me how to query off the user fields on HR11  Having a duh moment for sure..... thanks.

This is a TDS LDAP.  LSF 9.0.1 on AIX I found (here) how to copy users from LDAP to LDAP using an undocumented (that I could find) feature of ldifgen.   However, unless there is another undocumented feature ldifgen doesn't dump the rules and security classes.     I can create an ldif using jxplorer, of course, but if there is a Lawson tool or a preferred method, I'd rather not re-invent the wheel. Anyone know how to do this  Am I barking up the wrong cat

We were on LSF9, ESP6, but upgraded to ESP8 this weekend.  We now see a new behaviour that did not happen in ESP6.   Basically, we have some recurring jobs (some of which run multiple times per day), and we had added a 'post-run' job that would duplicate the *prt and *dtl files with copies (with timestamp-based 'unique' names).  These copies of the prt files would remain in the print directory, even after the job ran again and created (over-wrote) the 'regular' prt and dtl files.  This enabled o...

trying to figure out what i need to get lawson/infor process automation to get it going. i checked my download page, i only see process automation designer. don't i need process automation connector to be installed/configure on my LSF9 env i know that designer is for desktop piece. hate to open a can of worm, but lawson has been Kornfusing me for the last 15 yrs on their docu.

lsdump/lsload takes care security perfectly, but i want to use loadusers. how do i extract user(s) infor from prod (ADAM ldap) so i can use userload to load to test/qa server.

Greetings All, I wanted to know if any one here has used any kinds of automated testing tools with Lawson We want to automate lawson test cases, and need to know which testing tool would work best. Any feed back would be greatly appreciated.

We are still on release 8.0.3/Unix/Oracle. We have several Visual Basic programs that do AGS calls to various Lawson forms (OE10, RQ10 for example). In some cases, when passing the FC value (for a change for example) - the VB app passes a 'C' and in other cases it passes the whole word 'CHANGE'. We have an issue now where VB apps that used to pass the whole word 'CHANGE' via the AGS call are no longer working - they have to be changed to pass just the 'C'. We are trying to figure out...

There are a number of shell scripts I have seen that re submit bad compiles on a Unix server.  By bad compile I mean programs that fail a compile and have a .err file in ...\ directory.  But I am relatively new to the Windows systems and wonder if anyone out there might have a BAT file equivalent script  Perhaps a perl script can work as well

We recently installed Landmark and are now looking more into IPA.  I set up a quick email IPA to make sure it works and it sent the email as expected.  So, I would now like to use IPA with LSF.  I found a guide 'Infor Lawson System Foundation Using Infor Process Automation Configuration Guide'  The process for configuring IPA to work with LSF doesn't look horrible, but I am stuck with a question during the initial setup of the IPA productline. When you get to the configure database access sec...

I have windows server with lsf9.0.1 with two productlines (803 old and 901-current in production).  Want's to drop 803pl and create back with 901, but notice orphan jobs and print files if I drop 803.   Any suggestions

I've seen a couple of threads on this same issue, but none of the resolutions apply to me.  I have a fresh install in Windows Server 2008 R2.  The laconfig command shows the environment, but none of the additional installs list this environment.  Can anyone offer assistance on correcting this issue

We have a user with two separate job definitions for the same form. The jobs are called PR132R and PR132U. When the user runs the PR132R, it puts the print files in the print directory for PR132R. When the user runs PR132U, it also puts the print files in the print directory for PR132R, overwriting the previously run PR132R print files. There is nothing in the print directory for PR132U. We had the user delete those jobs and add new ones and the behavior is still the same.  In the Job Schedule y...

We're looking to upgrade our ESP from 9.0.1.8 to 9.0.1.10. I'm a little confused on what versions of the WAS fixpacks to use We're also coupled with Landmark 9.2.3.2. It appears our Landmark fixpack has to stay on 7.0.0.13, but LSF says minimum fixpack 21. Also we have some end-points that tie back to LSF & LMK Just trying to figure out what is the best method for this Or should I just leave everything on Fixpack 13 Any suggestions on handling this LSF App - Minimum Fixpack 21 Lan...

can someone tell me differences btwn S3 vs M3 products

We migrated from a IBM P5 to IBM P7 server and COPIED the AIX and lawson environments - no reinstallation of anything. All is well EXCEPT we experience slow response the 1st time we interact with lawson commands, jobschd, latm,lashow. etc. Is there a way to recompile or relink $GENDIR/bin components without reinstalling

If you have successfully set up and configured LS to STS authentication on S10 (version 10.0.x), drop me an email at:  rfrench5gmail.com  or respond here to this thread. Trying to set it up. This is new 'technology', and can't seem to get the 'Trusted Identity Provider' and 'Lawson Security Token Service' options to actually appear when trying to change the Authentication Providers.Tried rebooting, DSP, etc.  Thank you, -R

I am having two issues with getting my test environment up and running that I can't seem to find any good info on our there in Lawson support land. 1) My test environment, while up and running, is still pulling data from my production database, not my test database. I found the CAPS file = MICROSOFT, but any manipulation of that file doesn't seem to have any bearing on where the environment gets it's data. 2) I mistakenly ran 'laconfig -install' while trying to figure out issue 1. It saw my e...

Good morning.  I wanted to throw this out there on lawsonguru.  I am running into an issue with a simple token that is part of a jobstream.  The token is literally a mv command to move the file from one location to another.  When I run the command from the command line it works.  When I run the command from within jobdef submitting the stream I get a file does not exist and the job goes into waiting. Anyone run into this before

On Lawson Windows, I have a multi-step job in which the first step runs  a token to copy some files.   The token runs a Windows command file, which calls a VB script. If that step errors, I want to terminate processing without running the second step.  Previously on Lawson iSeries AS400, we'd use a Lawson program called LA200 to perform file copies, and its paramter form had a 'Is failure critical' setting that could be used for this purpose. There's no LA200 program on Lawson Windows, an...

The following is a way to have multiple lawson sessions open and not have them share information across the session.  For example you can be logged in as 2 different users. Create a new shortcut for IE by following the steps below:     1.  Right click on your desktop and select New / Shortcut from the popup menu.     2.  Enter the text below for the location             'C:\Program Files\Internet Explorer\iexplore.exe' -nomerge     3.  Click Next     4.  Give the shortcut a name     5. ...

Hi All, Is there a Lawson parameter which would timeout / close a session after certain 'idletime' ( Oracle provides a profile parm) Frinstance some users do not log off Lawson but lock/close their workstations . Thanks !

Anyone out there running on Solaris  We're running Solaris 10, and I just found out that until today, Infor development had not even had Solaris 11 on their roadmap for certification. I'd suspect that they currently are 'fast-tracking' Solaris 11 certification... but I'm glad that we asked the question as some of the new servers require Solaris 11.

My apologies in advacen for the xpost, but I started thinking maybe this was more of an admin question.  ;-) I'm looking for anyone who can offer advice w.r.t. implementing custom recsum.htm (inbasket execs) on RQC 10.0.2 and higher.  I am working with a consultant who has given me copies of a 'standard' recsum.htm and a custom version of same to add to the bpm execs. Of course I followed the steps to add the execs to the bpm.war and then rebuild and redeploye the bpm.ear, but the results ...

I'm trying to make sense of the product compatibility matrix as we look at going from LSF 9.0.1.9 to 9.0.1.10 or 9.0.1.11. Our current server is Windows Server 2008 standard. The Perl seciton of the product compatibility matrix looks like this:   Windows Server 2008 (64-bit) Standard, Enterprise Data Center Edition Windows Server 2008 R2 (64-bit) Standard, Enterprise Data Center Edition Perl 5...

I've installed S3 v10.0.2 on Windows. Installed DSP and LSS. Now trying to install the new LS to STS authentication option (vs. Kerberos) So, I've imported the Sharepoint service OK. The Referral Service name is SSOP. So when I attempt to add an identity for the Sharepoint Service using ssoconfig, I'm getting the error message: 'Lawson Service Name ():Infor10_Sharepoint Error:This service is referring service SSOP for identity. Please Add/Modify/Del ete identity for service SSOP inste...