Infor 10 Workspace/ Portal issues

If SSO smoketest failed, then so will portal, so you need to resolve the SSO issues first.
make sure you did the bouncy castle on both the sun JDK as well as the IBM/WebSphere JDK...that is a common error.
Also, make sure you have websphere JVM settings / classpath fully and properly configured before you start the LSF install.
You will need sharepoint eventually during the install and for your end users, but for smoke-testing, portal will and should work.
In fact, you should make sure "portal" is working before you get to the workspace/sharepoint configuration.
Since you are on windows, my advice is to install hyper-v role on that server, and build it in a VM first while you are learning.
That way, you can snapshot after each step, and roll-back as needed.

Thankyou so much John, Your reply gave me a good suggestion, I recalled that I changed one of the environment variables in websphere after the LSF install,
I reloaded the install and the smoke test for SSO and ssologin worked.
Now I have the issue, when I login using Portal, I get this error in the ladb.log

Sun Dec 30 01:08:21 2012: DBDataAreaFactory_1 Create of kind "GEN" failed.
java.lang.UnsatisfiedLinkError: com/lawson/rdtech/db/api/DBJni.jniTsDBConnect(I)Ljava/lang/Integer;

The browser displays:
The S3 for Workspace cannot load because the Profile service returned an error:
An unknown error occurred. Please contact your system admin.


I added the LD_LIBRARY_PATH as d:\java\jre\lib in the environment variables as well as, in Websphere , process definition environment entries.
Have you seen this error and any suggestions that you can give ?

Thanks again for resolving the SSO issue.

Srini,
Double-check your WAS classpath. This error looks familiar to ones I have seen in LSF9.
As for Workspace, you'll need Workspace for sure, as Roger and John have both advised.

As to John's advice on virtualization for test/learning, I *fully* second his recommendation.

Kwane

You will need SharePoint eventually for end users, but you can use Portal for simple UI smoke-testing. You should have a working Portal install prior to installing SharePoint and the Workspace configuration on top of SharePoint. In other words, if can't get Portal (e.g. S3 for Workspace) working first, there's no point in continuing on to the SharePoint and Workspace installation.

To solve Portal/Workspace issues, make sure you can use simple LID commands.
For instance, does 'rngdbdump -c GEN PRODLINE' work? if not, you have issues deeper down in the stack.

This particular error does indicate an issue with classpath in WAS.

Thankyou guys, I went further along, but I get a different error.I redid the application server bindings and propagated the plugins.

SSO login and BPM is successful.

Still running into an error in one of the smoke test on servlet/sysenv any clues ?

Added Classpath in system variables:
d:\lawson\gen\java\jar\lawsonrt.jar;d:\lawson\gen\java\jar\lawsec.jar;d:\lawson\law\system;d:\lawson\gen\java\jar\IOS.jar;D:\lawson\gen\java\thirdParty\secLS.jar;D:\lawson\gen\java\thirdParty\ehcache-core-1.7.2.jar;.

Added Classpath in WAS Process Definition:
D:\lawson\gen\java\jar\lawsonrt.jar
D:\lawson\gen\java\jar\lawsec.jar
D:\lawson\gen\java\thirdParty\secLS.jar
D:\lawson\law\system
D:\lawson\gen\java\jar\IOS.jar
D:\lawson\gen\java\thirdParty\ehcache-core-1.7.2.jar
D:\IBM\WebSphere\AppServer\plugins\javax.j2ee.servlet.jar
D:\IBM\WebSphere\AppServer\plugins\javax.j2ee.jsp.jar
D:\IBM\WebSphere\AppServer\plugins\javax.j2ee.jta.jar

 rngdbdump -c GEN user
WARNING: File 'user' contains BINARY fields.
Dumping/Loading in non-dbdump/dbload format may produce unreliable results.
Dumping user ...       UserName,SecClass,AdmClass,PrinterName,Locale,SecOfficer,
ClassSup,ProductLine,CrtDspOpt,HiLiteReqFlds,mAppObjs,SecOnOff,DelUpdateJobs,Mod
GlobalForm,ModLocalForm,FillD,FillE,FillF,DataSecGroup,PrinterGroup,DfltValSep
"NT00000002",,,,,,,,,,1,,1,,,,,,,,
"NT00000003",,,,,,,,,1,5,,,,,,,,,,

http://localhost:81/servlet/SysEnv

 
-
-
-   ]]>
 
-

-  javax.servlet.ServletException: Filter [AuthenticationFilter]: filter is unavailable.
 at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:231)
 at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
 at com.lawson.servlet.CallLoggingFilter.doFilter(CallLoggingFilter.java:117)
 at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
 at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
 at com.lawson.servlet.XSSValidatorFilter.doFilter(XSSValidatorFilter.java:112)
 at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
 at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
 at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:77)
 at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:908)
 at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:934)
 at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
 at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:181)
 at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:91)
 at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:864)
 at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1592)
 at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
 at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:452)
 at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:511)
 at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:305)
 at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
 at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
 at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
 at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
 at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
 at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
 at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
 at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
 at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1646)
Caused by: java.lang.NoClassDefFoundError: org.joda.time.ReadableInstant
 at java.lang.J9VMInternals.verifyImpl(Native Method)
 at java.lang.J9VMInternals.verify(J9VMInternals.java:72)
 at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
 at com.lawson.ios.dig.db.DigObject.executeInternalRequest(DigObject.java:241)
 at com.lawson.ios.dig.db.DigObject.executeRequest(DigObject.java:204)
 at com.lawson.ios.dig.db.Dme.executeRequest(Dme.java:76)
 at com.lawson.ios.dig.db.Dme.executeRequest(Dme.java:50)
 at com.lawson.ios.agent.container.r8_1.GenUserProfileImpl.(GenUserProfileImpl.java:92)
 at com.lawson.ios.agent.container.r8_1.UserProfileImpl.(UserProfileImpl.java:78)
 at com.lawson.ios.agent.container.r8_1.UserProfileFactory.createProfile(UserProfileFactory.java:117)
 at com.lawson.ios.agent.container.r8_1.UserProfileFactory.createProfile(UserProfileFactory.java:83)
 at com.lawson.ios.security.IOSSecurityContext.(IOSSecurityContext.java:115)
 at com.lawson.ios.security.IOSSecurityContext.initialize(IOSSecurityContext.java:56)
 at com.lawson.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:95)
 at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
 ... 28 more
Caused by: java.lang.ClassNotFoundException: org.joda.time.ReadableInstant
 at java.net.URLClassLoader.findClass(URLClassLoader.java:434)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:660)
 at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:358)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
 ... 43 more
 

  ]]>
 

 

Hmmm...
I'm not familiar with any Lawson component that is using joda, and it seems to be blowing up inside of the JVM itself, so what I'd first do would be to reorder the classpath, to ensure they are loading in the correct order.
Use the following ordering:
D:\IBM\WebSphere\AppServer\plugins\javax.j2ee.servlet.jar
D:\IBM\WebSphere\AppServer\plugins\javax.j2ee.jsp.jar
D:\IBM\WebSphere\AppServer\plugins\javax.j2ee.jta.jar
D:\lawson\gen\java\jar\lawsonrt.jar
D:\lawson\gen\java\jar\lawsec.jar
D:\lawson\gen\java\thirdParty\secLS.jar
D:\lawson\gen\java\jar\IOS.jar
D:\lawson\gen\java\thirdParty\ehcache-core-1.7.2.jar
D:\lawson\law\system

..next, check that classpath to ensure everything has carriage returns at the end of each line, no extra spaces, yada, yada, yada.

The error implies that Lawson is trying to create a DB connection thread to read your profile info, but blows up in some sort of time synchronization call in the main JVM thread.

John H., any ideas?

Kwane

I just noticed something...

Why are you adding IOS.jar and ehcache jar to the main JVM's classpath???

Those shouldn't be there...this is documented in the install guide. Do you have a copy of that?

Kwane

Kwane:
I do have the install document. I added those extra jar files thinking those classes were not loaded.
I reversed the changes according to the document as well as I tried your order, no luck. The below order from the install doc.
D:\IBM\WebSphere\AppServer\plugins\javax.j2ee.jta.jar
D:\lawson\gen\java\jar\lawsonrt.jar
D:\lawson\gen\java\jar\lawsec.jar
D:\lawson\gen\java\thirdParty\secLS.jar
D:\lawson\law\system
D:\IBM\WebSphere\AppServer\plugins\javax.j2ee.servlet.jar
D:\IBM\WebSphere\AppServer\plugins\javax.j2ee.jsp.jar

Ladb.log error:
Mon Dec 31 16:30:37 2012: DBDataAreaFactory_1 Create of kind "GEN" failed.
java.lang.UnsatisfiedLinkError: com/lawson/rdtech/db/api/DBJni.jniTsDBConnect(I)Ljava/lang/Integer;
Browser error on http://localhost:81/servlet/SysEnv
javax.servlet.ServletException: Filter [AuthenticationFilter]: filter is unavailable.
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:231)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
at com.lawson.servlet.CallLoggingFilter.doFilter(CallLoggingFilter.java:117)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
at com.lawson.servlet.XSSValidatorFilter.doFilter(XSSValidatorFilter.java:112)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:77)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:908)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:934)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:181)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:91)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:864)
at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1592)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:452)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:511)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:305)
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1646)
Caused by: java.lang.UnsatisfiedLinkError: com/lawson/rdtech/db/api/DBJni.jniTsDBConnect(I)Ljava/lang/Integer;
at com.lawson.rdtech.db.api.DBDataArea.validateHandle(Unknown Source)
at com.lawson.rdtech.db.api.DBDataAreaFactory$PooledDataArea.validateHandle(Unknown Source)
at com.lawson.rdtech.db.api.DBDataArea.(Unknown Source)
at com.lawson.rdtech.db.api.DBDataAreaFactory$PooledDataArea.(Unknown Source)
at com.lawson.rdtech.db.api.DBDataAreaFactory$PooledDataArea.(Unknown Source)
at com.lawson.rdtech.db.api.DBDataAreaFactory.create(Unknown Source)
at com.lawson.rdtech.util.ObjectPool.internalCheckOut(Unknown Source)
at com.lawson.rdtech.db.api.DBDataAreaFactory.checkOut(Unknown Source)
at com.lawson.rdtech.db.api.DBDataAreaFactory.checkOut(Unknown Source)
at com.lawson.rdtech.db.api.DBDataAreaFactory.checkOut(Unknown Source)
at com.lawson.ios.dig.db.DigObject.getDbDataArea(DigObject.java:722)
at com.lawson.ios.dig.db.DigObject.executeInternalRequest(DigObject.java:242)
at com.lawson.ios.dig.db.DigObject.executeRequest(DigObject.java:204)
at com.lawson.ios.dig.db.Dme.executeRequest(Dme.java:76)
at com.lawson.ios.dig.db.Dme.executeRequest(Dme.java:50)
at com.lawson.ios.agent.container.r8_1.GenUserProfileImpl.(GenUserProfileImpl.java:92)
at com.lawson.ios.agent.container.r8_1.UserProfileImpl.(UserProfileImpl.java:78)
at com.lawson.ios.agent.container.r8_1.UserProfileFactory.createProfile(UserProfileFactory.java:117)
at com.lawson.ios.agent.container.r8_1.UserProfileFactory.createProfile(UserProfileFactory.java:83)
at com.lawson.ios.security.IOSSecurityContext.(IOSSecurityContext.java:115)
at com.lawson.ios.security.IOSSecurityContext.initialize(IOSSecurityContext.java:56)
at com.lawson.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:95)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)

Kwane/John:
the problem is resolved. In my path setting, I did not have the d:\lawson\gen\bin; instead I had d:\lawson\gen.
You guys are awesome, I started thinking in a different direction and was able to resolve the issue.
one question, though, do we really need sharepoint ? our organization are little bit against having a sharepoint.
Any thoughts of pros and cons ? and is it a supported environment without sharepoint

Yes it is UI replacement for portal. Some things are now in SharePoint workspace, like bookmarks. alternatively you can use smart office. As for SharePoint, it can be standalone instance of SharePoint foundation.

Before I head out for the New Year's Eve festivities:

YES, you do need Sharepoint, which in this case it's provided by Infor. It's Infor's branding of Sharepoint.  It's NOT a supported environment without this Sharepoint. When you start bringing everything else in (Landmark, to use only one example) you will find that eventually you will need Sharepoint. I took the S10 Install course earlier this fall and it's needed. I'm sure you could probably just use stripped down Portal and be happy with that... but, when things start going wrong in the future, or things don't work "right", or when you start installing other Infor/Lawson products, and you don't have Sharepoint.........

Your organization may be 'a little bit against' Sharepoint, but what to not like about it. So what, it's required with Infor/Lawson to be fully supported. You won't have to use it with any other non-Infor/Lawson products.

Your going to have to use LS9 Security too. Oh, and LID goes away for app users (stays for sys admins for sys admins tasks). There will be things you don't like and things you will like about S10.

Oh, and you can always go the Smart Office route too.

Anyways good luck and Happy 2013.

-Roger

Posted By Roger French on 12/31/2012 07:54 PM
 you do need Sharepoint, which in this case it's provided by Infor. It's Infor's branding of Sharepoint. 

This is incorrect. SharePoint still comes from Microsoft, not Infor.
You have several choices of which SharePoint product to use and install, including the free SharePoint Foundation in standalone configuration.

What is provided by Infor for installation ON TOP of SharePoint is:
1. WorkSpace, which is a SharePoint web application that provides branding and plumbing for  various Infor products.
2. Infor 10 Workspace-Lawson S3 Plug-in, which connects WorkSpace / SharePoint to Lawson S3 for WorkSpace/Portal

Yes, I know. SharePoint still comes from Microsoft. Yes it is a Microsoft product of course. Infor may begin offering the free SharePoint version download from the InforExtreme site in the future, who knows. You don't have to use the free SharePoint version. 

Yes you are correct in that WorkSpace is provided by Infor, which is the branding piece installed on top of SharePoint. The point I was trying to get across was that the layer which the user sees (Workspace and Portal) is provided by Infor. 

John: Please correct me, if I am wrong. Infor 10 Workspace is nothing but portal. I have the portal or infor 10 S3 for workspace working correctly.But when I try to install the Infor 10 workspace S3 plug in , I get an error that
"Infor 10 workspace must be installed and deployed prior to installing this product"

From the technology perspective, "S3 for Workspace" is replacement for portal, and in fact, the installer is PORTAL.jar. However, that is only part of the puzzle.
From the user perspective, they are seeing "Infor Workspace" as the replacement for portal.
You have only installed the Lawson part, not the Infor Workspace part, and are now trying to install the S3 plugin for Workspace (it's a Sharepoint .wsp plugin) onto the wrong server.
So, in order to complete the UI replacement for Portal, you will also need to install SharePoint, Workspace, Lawson DSP/DSSO, and the Lawson S3 Plugin for Workspace (which is a Sharepoint plugin that then talks back to the Lawson "S3 for Workspace" on the Lawson app server).
Folks, it's big, and it's complicated.

Lawson
----------
LSF
WebSphere
IIS
S3 for Workspace/Portal

Workspace
---------------
Microsoft SharePoint
Infor Workspace
Lawson DSP/DSSO
S3 Plugin for Workspace

John, I kind of get the how big of a beast is this :-) . Are you saying that Sharepoint server will be on a different machine ? Then you install the same portal.jar(infor workspace) and then do the LawsonDSP/DSSO and S3 plug in for workspace that will talk back to the Lawson S3 for workspace on my lawson server. Does the sharepoint server need to be on a different machine or can I install on the same lawson server ?
what do Lawson recommend, use an existing sharepoint site if its there ? Much appreciated for your quick response

Yes, Lawson and Sharepoint/Workspace on different servers.
portal.jar is NOT infor workspace it is "S3 for Workspace".
The actual infor workspace product is a separate download and install on the sharepoint server.

Thanks John. Will take a look at the install now.

John: I went ahead and installed a sharepoint standalone server, installed infor workspace and then started to install the Distributed security package.
1. Have a question on the configuration of Distributed security package:
The url for the Infor http:///Workspace root web
what is the URL, is this corresponding the lawsonportal url ?
2. After successful DSP installed per the instructions in DSPIG_10.0.1.0_W.pdf , says that "Not to deploy the application", but the Infor 10 workspace S3 plugins installation throws an error that "DSP must be installed prior to installing this product
Any ideas ? FYI: I am trying to do a proto type in my dev environment for a POC

1. The "Infor Workspace root web" is the URL for the SharePoint web application you created after installing SharePoint, and into which you installed workspace.
2. Make sure you create the LASYSDIR environment variable noted in the DSP post-install step (and you might need to reboot).

I still get the error, that DSP needed to be deployed for the lawson S3 plug in.

I looked at the log file , and looks like I am not giving the right URL. I thought the URL will be the one which I used to configure the workspace.

Error: Install-SPSolution : Cannot find an SPWebApplication object with Name, Id, or Url: http://inforbi:8000

I am able to get pass the error and Did all the plugins for the workspace.
Able to get the sharepoint site with the S3 plugins. When I click on lawson S3, I get
From the site:
An error occurred while trying to render the application. Contact your system administrator.
System Message -
Bad value for argument {0} passed to function.
The eventviewer has this error:

Category: Infor10 Workspace: An exception has occurred.
ExceptionType: 'SecurityEventException'
ExceptionMessage: 'Bad value for argument {0} passed to function.'
StackTrace: ' at SecClient.Authentication.ClientProcessIdentityContext..ctor()
at SecClient.Authentication.ClientProcessIdentityContext.get_Context()
at SecClient.Managers.ConnectionFactory.GetSocketConnection()
at InforS3WebPart.VisualWebPart1.XferWebPart.AppendCustomParameters(String applicationUrl)
at Infor.CompanyOn.WebParts.ApplicationContainerWebPart.GetIframeUrl(String deploymentLogicalId)
at Infor.CompanyOn.WebParts.ApplicationContainerWebPart.AddApplicationFrame()
at Infor.CompanyOn.WebParts.ApplicationContainerWebPart.CreateChildControls()'
Source: 'sec-client'
TargetSite: 'Void .ctor()'

Additional Information:
Request TimeStamp: '2013-01-17T14:50:30.3793075-08:00'
UserName: XXXX Request URL: 'http://yyyyy:9636/Lawson S3/SitePages/Default.aspx'


FYI: I have not done the ldapbind yet, but I thought I should be able to login as lawson user as its in the domain.

looks like I have to follow the Infor Lawson 10 Authentication
Configuration Guide--Windows, will keep posted if I run into issues

John:
When DSP, is configured, a windows service is created ? will it be created in the sharepoint server ?
-----From the .pdf.----------------------------------
You will have to select the correct Lawson Service name which represents the
Sharepoint/Infor10 Workspace machine name. This Lawson service is typically created
during the DSP install.